ENIB 2023 : Salade d'Enigmes

photo de l'équipe

Que fait ce projet ?

Ce projet est une combinaison de 4 énigmes.

Liste des parties

• Partie 1

[[

]]

• composant 2
• ...

Code

Code pour la partie Tableau périodique (Il y a une librairie à télécharger) :

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 64 // OLED display height, in pixels
#define valPotReader A0
#define buttonPer D8
#define Win D7

#define OLED_RESET     -1 // Reset pin # (or -1 if sharing Arduino reset pin)
#define SCREEN_ADDRESS 0x3C ///< See datasheet for Address; 0x3D for 128x64, 0x3C for 128x32
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

int valPot;
int pos=0;
int resultPer[2]={0,0};
int solPer[2] = {29,13};
bool buttonPerState=0;
bool prevButtonPerState=0;


void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);

  pinMode(valPotReader,INPUT);
  pinMode(buttonPer,INPUT);
  pinMode(Win,OUTPUT);

  // SSD1306_SWITCHCAPVCC = generate display voltage from 3.3V internally
  if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }

  // Show initial display buffer contents on the screen --
  // the library initializes this with an Adafruit splash screen.
  display.display();
  delay(2000); // Pause for 2 seconds

  // Clear the buffer
  display.clearDisplay();
}


void loop() {
  // put your main code here, to run repeatedly:
  valPot=round((float(analogRead(valPotReader))/1024)*118);
  show();
  if(isPressed()){
    Serial.println("oui");
    int i = pos%2;
    pos=pos+1;
    resultPer[i]=valPot;
    show();
    };

  Serial.println((resultPer[0]==solPer[0] && resultPer[1]==solPer[1]));

  if(resultPer[0]==solPer[0] && resultPer[1]==solPer[1])
  {
    Serial.print("Win");
    digitalWrite(Win,HIGH);
  }else{digitalWrite(Win,LOW);}

}

void show(){
  display.clearDisplay();
  display.setTextSize(4);
  display.setTextColor(SSD1306_WHITE);
  display.setCursor(16,16); 
  display.print(valPot);

  display.setTextSize(1);
  display.setCursor(80,53); 
  display.print(resultPer[0]);
  display.print('|');
  display.print(resultPer[1]);


  display.display();
}

bool isPressed(){
   buttonPerState=digitalRead(buttonPer);

  if(prevButtonPerState==0 && buttonPerState==1){
    prevButtonPerState=buttonPerState;
    return 1;
  }
  else{
    prevButtonPerState=buttonPerState;
    return 0;
  }
}