Lampe Eveil

Présentation

Dans le contexte que nous connaissons actuellement, il est primodrial de réaliser des économies d'énergie. C'est pour cela que nous avons décider d'inventer une lampe qui s'adapte à la luminosité de l'environnement dans laquelle elle est positionné. Pour cela nous avons utiliser un ARDUINO.

Conception

Matériel

• Carte Arduino UNO

• Breadboard

• 3 LED RGB

• 1 Photorésistance

• 1 Bouton

• 11 Résistances (10 de 220Ω pour les LED et 1 de 10kΩ pour le bouton poussoir)

Code

int analogPin= A0;
int sensorValue= 0;
int outputValue=0;
bool interuValue=false;

void setup() {
  // put your setup code here, to run once:
   Serial.begin(9600);
   pinMode(analogPin, OUTPUT); 

//led1
pinMode(11,OUTPUT);
pinMode(12,OUTPUT);
pinMode(13,OUTPUT);

//led2
pinMode(5,OUTPUT);
pinMode(6,OUTPUT);
pinMode(7,OUTPUT);


//led3
pinMode(8,OUTPUT);
pinMode(9,OUTPUT);
pinMode(10,OUTPUT);

//led4
pinMode(1,OUTPUT);
pinMode(2,OUTPUT);
pinMode(3,OUTPUT);


//interrupteur
pinMode(4,INPUT);

//initialisation des leds


digitalWrite(11,HIGH);
digitalWrite(12,HIGH);
digitalWrite(13,HIGH);

digitalWrite(5,HIGH);
digitalWrite(6,HIGH);
digitalWrite(7,HIGH);

digitalWrite(8,HIGH);
digitalWrite(9,HIGH);
digitalWrite(10,HIGH);

digitalWrite(1,HIGH);
digitalWrite(2,HIGH);
digitalWrite(3,HIGH);
}

void loop() {
 
//etat photoresistance
sensorValue=analogRead(analogPin);

//etat interrupteur
interuValue=digitalRead(4);
Serial.println(sensorValue);

if (interuValue==0)
{
digitalWrite(11,HIGH);
digitalWrite(12,HIGH);
digitalWrite(13,HIGH);
digitalWrite(5,HIGH);
digitalWrite(6,HIGH);
digitalWrite(7,HIGH);
digitalWrite(8,HIGH);
digitalWrite(9,HIGH);
digitalWrite(10,HIGH);
digitalWrite(1,HIGH);
digitalWrite(2,HIGH);
digitalWrite(3,HIGH);
}
else {

if (sensorValue>=0 && sensorValue<=10){
digitalWrite(11,LOW);
digitalWrite(12,LOW);
digitalWrite(13,LOW);
digitalWrite(5,LOW);
digitalWrite(6,LOW);
digitalWrite(7,LOW);
digitalWrite(8,LOW);
digitalWrite(9,LOW);
digitalWrite(10,LOW);
digitalWrite(1,LOW);
digitalWrite(2,LOW);
digitalWrite(3,LOW);

  
}

else if (sensorValue>=10 && sensorValue<=20){
digitalWrite(11,LOW);
digitalWrite(12,LOW);
digitalWrite(13,LOW);
digitalWrite(5,LOW);
digitalWrite(6,LOW);
digitalWrite(7,LOW);
digitalWrite(8,HIGH);
digitalWrite(9,HIGH);
digitalWrite(10,HIGH);
digitalWrite(1,HIGH);
digitalWrite(2,HIGH);
digitalWrite(3,HIGH);
}

else if (sensorValue>=20 && sensorValue<=30){
digitalWrite(11,LOW);
digitalWrite(12,LOW);
digitalWrite(13,LOW);
digitalWrite(5,HIGH);
digitalWrite(6,HIGH);
digitalWrite(7,HIGH);
digitalWrite(8,HIGH);
digitalWrite(9,HIGH);
digitalWrite(10,HIGH);
digitalWrite(1,HIGH);
digitalWrite(2,HIGH);
digitalWrite(3,HIGH);
}


else{
  
digitalWrite(11,HIGH);
digitalWrite(12,HIGH);
digitalWrite(13,HIGH);
digitalWrite(5,HIGH);
digitalWrite(6,HIGH);
digitalWrite(7,HIGH);
digitalWrite(8,HIGH);
digitalWrite(9,HIGH);
digitalWrite(10,HIGH);
digitalWrite(1,HIGH);
digitalWrite(2,HIGH);
digitalWrite(3,HIGH);
}
  

}


}